Weber performer deluxe User Manual (English)

Questions and Answers:

T
Toni JohnstonAug 15, 2025
What to do if Weber performer deluxe burner does not ignite when pushing the igniter button?
- C
  Craig BowmanAug 16, 2025
  If your Weber Grill burner doesn't ignite when you push the igniter button, and match lighting is successful, the issue is likely in the ignition system. Refer to “ELECTRONIC IGNITION SYSTEM OPERATION.” Also, check if a fresh battery is installed correctly, referring to “ELECTRONIC IGNITER INSPECTION.” Ensure wires are correctly inserted into terminals on the ignition box, as described in “ELECTRONIC IGNITION SYSTEM OPERATION,” and remove any plastic wrapping from the new battery.
S
Samantha WestAug 19, 2025
Why Weber performer deluxe burner does not light, or flame is low?
- A
  Austin SalasAug 19, 2025
  If the burner on your Weber Grill does not light or the flame is low, first replace the LP cylinder if the LP fuel is low or empty. Next, check to see if the fuel hose is bent or kinked, and if so, straighten it. If you can light the burner with a match, then check the ignition system. Also, ensure the gas hose is properly connected to the burner tube using the metal retaining clip provided. Warning: Do not use the gas ignition feature if the retaining clip is missing.
J
johngordonAug 21, 2025
What to do if my Weber performer deluxe burner does not light or the flame is low?
- G
  Gregg GrimesAug 21, 2025
  If your Weber Grill burner does not light or the flame is low, first, replace the LP cylinder if the LP fuel is low or empty. Next, straighten the fuel hose if it is bent or kinked. If you can light the burner with a match, then check the ignition system. Also, connect the gas hose to the burner tube using the metal retaining clip provided. DANGER: Do not use the gas ignition feature if the retaining clip is missing. A missing retaining clip can cause serious bodily injury or death, and damage to property. Contact Customer Service for a replacement retainer clip.
J
John VazquezAug 25, 2025
How to clean Weber Grill lid that appears to be peeling?
- U
  ucolonAug 26, 2025
  The “peeling” inside the lid of your Weber Grill is likely baked-on grease that has turned to carbon and is flaking off, which is not a defect. To resolve this, clean the lid thoroughly. (See “Cleaning” section)
F
Francisco AdamsAug 27, 2025
How to fix erratic burner flame pattern on Weber performer deluxe?
- V
  Victoria BarryAug 27, 2025
  If the burner flame pattern is erratic on your Weber Grill, clean the burner. (See Section “Maintenance”)
D
Debbie JohnsonAug 31, 2025
What to do if Weber Grill burner flame pattern is erratic?
- M
  Mary WilsonAug 31, 2025
  If the burner flame pattern is erratic on your Weber Grill, clean the burner. (See “Maintenance” section)
R
ramirezjosephSep 3, 2025
Why Weber performer deluxe timer does not work?
- M
  Mark PerezSep 3, 2025
  If the timer on your Weber Grill does not work, verify that the batteries are in good condition and installed correctly. Refer to “TIMER OPERATION.”
J
johnsonlindaSep 6, 2025
How to fix Weber Grill burner with yellow flame and gas smell?
- T
  Tiffany OrtizSep 6, 2025
  If your Weber Grill burner burns with a yellow or orange flame and smells of gas, clean the burner. (See “Maintenance” section)
J
Jennifer SandovalSep 8, 2025
Why does the inside of my Weber performer deluxe lid appear to be peeling?
- C
  Christopher JosephSep 9, 2025
  If the inside of your Weber Grill lid appears to be peeling, what you're likely seeing is baked-on grease that has turned to carbon and is flaking off. This isn't a defect. To resolve this, clean the lid thoroughly. (See Section “Cleaning.”)

Weber performer deluxe Specifications

General

Type	Barbecue
Heat source	Charcoal (fuel)
Total power	- W
Smoke function	-
Adjustable thermostat	Yes
Cooking surface diameter	570 mm
Form factor	Kettle
Product color	Black, Stainless steel
Housing material	Aluminum
Top surface type	Grate
Built-in capability	No
Cooking surface shape	Round
Number of wheels	4 wheel(s)
Number of built-in cutting boards	1