7
- OUTDOOR-ANTI BLUR : It shows better anti-blur
performance at dark outdoor environment, but the
brightness level decrease a little.
- MANUAL : It fixes shutter speed within 1/30 ~
1/60000.
ANTI-FLICKER Removes Flicker problem due to the discordance of
light frequency.
DSS
(AUTO,
OFF,
x2~x10)
During night or low light environment, incrase the
scale factors to maintainet the clear image. However,
larger scales will have motion blurring effect on
moving objects. In AUTO mode, DSS is ON when there
are no motion detection. And when the camera detects
a movement, DSS mode is automatically turned off for
better quality.
AGC
(4, 1~10)
It will amplify video gain according to the light
condition, but it will also increase noise level.
COLOR AWB - AUTO : This mode automatically adjusts color white
balance between 1,700°K ~ 11,000°K.
- PRESET : Shoot a white paper in front of camera and
press MENU button then white balance working will
stop suitable for the condition. You must do this
process again if light condition is changed.
- MANUAL : User can select color temperature among
3300°K, 4300°K, 7600°K and adjust the details by
KELVIN, R-GAIN and B-GAIN value.
CHROMA
(10, 0~20)
Adjust Chroma level.
IMAGE SHARPNESS
(5, 0~10)
Adjust sharpness. The higher value will show more
clear video image
H-MIRROR Mirror image. Left and right will be reversed.
V-MIRROR Flip image. Up and down will be reversed.
Digital ZOOM Zoom image by 16 steps. (1~16)
PRIVACY This is for privacy zone masking
- ZONE NO : Supports total 15 areas (1~15)
- ZONE OP : Whether to use or not of selected area
- X, Y-POS : Set the X,Y start position of an area
- X, Y-SIZE : Set the width and height of an area
- COLOR(WHT,YEL,CYN,GRN,MAG,RED,BLU,BLK) : Select
color for masking.
- TRANS(0~4) : Set transparency of masking.
SHADING Before execute the SHADING function, shoot a white
To Next Page
Loading...
