WebGate C1080PBM - OSD Menu Usage; OSD Menu Function Access

6
<Note>
1) When upgrading F/W, the setting will be reset.
How to use OSD menu
OSD menu function
Press [SET] on the OSD remote controller to show OSD configuration menu.
- If OSD menu is not closed, it will be closed automatically in 1 minute.
(Changed configuration value will not be saved)
- Bold font with underline means factory default.
OSD MENU Function
FOCUS ADJ This mode is only enabled in manual lens model. This function prevents
out-focus during day/night.
LENS DC : Auto iris lens mode
MANUAL : Manual lens mode
DAY
&
NIGHT
Color Maintains Color(Day) mode regardless brightness.
B&W Maintains B&W(Night) mode regardless brightness.
Auto In accordance with brightness, camera switches Color
mode and B&W mode automatically.
- LUX LEVEL(LOW, MIDDLE, HIGH) : This value is the
standard for Day & Night switching. If high is
selected, camera will turn to Night(B/W) mode at
higher LUX level than MIDDLE or LOW.
- ANTI HUNT(LOW, MIDDLE, HIGH) : This value is the
standard for threshold of Day & Night switching.
Higher setting value will reduce the flickering by IR-
CUT filter switching caused from misjudgment.
- DELAY TIME(3~30sec) : Judgment period for Day &
Night switching
D-EXPOSURE
/
N-EXPOSURE
BRIGHTNESS
(8, 0~20)
Adjust the brightness of image.
The more High value it has, the more bright image it
shows
SHUTTER - INDOOR : controls brightness to show the best video
quality at indoor environment.
- OUTDOOR : controls brightness to show the best
video quality at outdoor environment.
- INDOOR-ANTI BLUR : It shows better anti-blur
performance at dark indoor environment, but the
brightness level decrease a little.