EasyManuals Logo

weBoost Drive 4G-M Manual

weBoost Drive 4G-M
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2 3
! !
THE ALUMINUM CASING OF YOUR SIGNAL BOOSTER
WILL ADJUST TO THE TEMPERATURE OF ITS
ENVIRONMENT, BUT IS DESIGNED TO PROTECT THE
SIGNAL BOOSTER TECHNOLOGY. FOR EXAMPLE, IN THE SUMMER,
THE SIGNAL BOOSTER CASE MAY BE AS HOT AS 150 DEGREES
INSIDE YOUR VEHICLE. THESE HIGH TEMPERATURES WILL NOT
DAMAGE THE SIGNAL BOOSTER, NOR DO THEY POSE A FIRE
RISK TO THE VEHICLE. AGAIN, BE SURE TO PLACE YOUR SIGNAL
BOOSTER IN A LOCATION WITH ADEQUATE VENTILATION AND
AWAY FROM DIRECT SUNLIGHT OR MOISTURE.
THE Drive 4G-M SIGNAL
BOOSTER MAY REMAIN
ON, IN VEHICLES WHOSE
12V DC POWER SOURCES DO NOT
AUTOMATICALLY SHUTDOWN WHEN
THE VEHICLE IS TURNED OFF. THIS
COULD RESULT IN DISCHARGING THE
VEHICLES BATTERY IN ONE TO TWO
DAYS.
Before Getting Started
Before you install your Drive 4G-M
Booster and start enjoying improved
cellular reception please do the following:
1. Read through all the installation
steps. This will help you know what
to expect from start to nish.
2.
Familiarize yourself with all
materials in your product package.
This will allow you to know which
pieces are referenced in the
instructions.
Installation Instructions for the Following weBoost Signal Boosters:
Drive 4G-M
TM
SmarTech
®
Signal Booster
Contents
Package Contents ....................................................3
Before Getting Started ................................................3
Installation ..........................................................3
Troubleshooting & Understanding Lights .................................5
Additional FAQ .......................................................6
Outside Antenna Options ..............................................6
Safety Guidelines ....................................................8
Signal Booster Specifications ..........................................9
Installation
You can install your Drive 4G-M
Signal Booster in your vehicle using
the following steps. NOTE: Before
completing your installation, create
a “soft” installation by putting the
components of your Drive 4G-M
Signal Booster in place and testing the
operation before mounting equipment.
1. Install the outside antenna. Select a
location on top of the car that is:
Near the center of the vehicle’s roof.
At least 12 inches from any other
antennas.
Free of obstructions.
At least 6 inches from any
windows (including sunroofs).
At least 8 inches from any people.
The outside antenna must be installed
vertically on a metallic surface.
Package Contents
Drive 4G-M
Signal Booster
Mini-Mag
Outside Antenna
301126
Slim Low Profile
Inside Antenna
301152
DC Power Supply
6V / 2A
859913
Optional Antennas
12” Mag Mount
Outside Antenna
311125
NMO
Outside Antenna
311104-5810
Marine
Outside Antenna
311130-5810
Trucker
Outside Antenna
311101
Appearance of device and accessories may vary.

Other manuals for weBoost Drive 4G-M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the weBoost Drive 4G-M and is the answer not in the manual?

weBoost Drive 4G-M Specifications

General IconGeneral
BrandweBoost
ModelDrive 4G-M
CategoryExtender
LanguageEnglish

Related product manuals