EasyManua.ls Logo

weBoost DRIVE X FLEET - Step 1: Drill Cable Entry Hole To Your Vehicle

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DRIVE X FLEET PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT
2
______
Step 1: Drill Cable Entry Hole
To Your Vehicle
Identify a location for NMO outside antenna on the
top of your vehicle that is:
Near the center of the roof
At least 12 inches away from any other antennas
At least 12 inches away from any windows
(for best performance install on top of vehicle)
Do a ‘soft install’ before drilling the hole for the
cable entry.
Set up the system by routing the cable through
an open door or window, completing the setup
instructions, verifying the system works as desired,
and then drilling the hole.
12 in. away from windows
(including sunroofs)
Good NMO Outside
Antenna Placement

Related product manuals