weBoost eqo 460032 - eqo Booster Installation - Connections and Final Steps; Step 2: Connect Booster Power and Coax Cable; Step 3: Antenna Placement and Mounting; Step 4: Connect Antenna to Coax Cable

Coax Cable
6 ft.
Power Supply
Coax Cable
Congratulations! Once your booster is running, please allow some time for your
phone to adjust to your new signal.
Read more about it here at weboost.com/us/test-mode-instructions/
Step 2
Step 3
Step 5
Connect the supplied Coax Cable and
Power Supply on the side of the Booster.
Place the Antenna where you need to boost your
signal, at least 6 feet away from the Booster. The
Antenna can be mounted on the wall.
Plug the Booster in. The light will blink red and
green for the first 10 seconds.
Step 4
Connect the other end of the Coax Cable to
the Antenna.