Weco Discovery 300 AC/DC User Manual

Cod.006.0001.1840
13/07/2016 v2.2
ENGLISH
WECO srl
Via S. Antonio, 22 - BELVEDERE
36056 TEZZE SUL BRENTA (VICENZA) ITALY
Tel.+39 0424 561943 – Fax +39 0424 561944
www.weco.it - E-mail info@weco.it
Discovery 300 AC/DC
Instruction manual
GB

Weco Discovery 300 AC/DC Specifications

General

Input Voltage	230 V
Input Frequency	50/60 Hz
Output Current Range (AC)	5 - 300 A
Protection Class	IP23
Insulation Class	H

Summary

Rear Panel

Installation Procedures

Connections to Electrical Mains

Instructions on how to safely connect the welding machine to the power supply network.

User Interface

Interface Elements and Functions

Unit Power-Up

Reset Procedures

Total Reset

Set-Up (Initial Setup)

Initial Setup Settings

Details initial setup options such as language selection and cooler activation.

Alarms Management

Alarm Messages and Handling

Welding Parameters

Parameter Descriptions and Effects

Explains the function and consequences of various welding parameters.

Parameters Activation

Welding Settings

Electrode Welding (MMA)

DC TIG Welding

AC TIG Welding

Torch Trigger Modes

2T Lift-Arc Welding

Step-by-step guide for performing welding using the 2-step lift-arc trigger mode.

2T HF Welding

Step-by-step guide for performing welding using the 2-step HF trigger mode.

4T Lift-Arc Welding

Step-by-step guide for performing welding using the 4-step lift-arc trigger mode.

4T HF Welding

Step-by-step guide for performing welding using the 4-step HF trigger mode.

Bi-Level Lift Welding

Step-by-step guide for performing welding using the bi-level lift trigger mode.

Bi-Level HF Welding

Step-by-step guide for performing welding using the bi-level HF trigger mode.

2T Spot Welding

2T Spot HF Welding

Pilot Arc Welding

Technical Data

Environmental and Performance Data

Electrical Diagram