Need help?Do you have a question about the Weco POWER PULSE DIGITAL 505d and is the answer not in the manual?
General| Input Phases | 3 |
|---|---|
| Input Frequency | 50/60 Hz |
| Welding Current Range | 5 - 500 A |
| Output Current Range | 5 - 500 A |
| Efficiency | 85% |
| Protection Class | IP23 |
| Welding Process | MIG/MAG, TIG, MMA |
| Input Voltage | 400V |
Overview of the Power Pulse 405d-505d as a welding power source for MIG/MAG, including fan operation and accessories.
Instructions for connecting the welding unit to the electrical mains supply and motorgenerators.
Details the components, controls, and connectors present on the front panel of the welding machine.
Describes the rear panel components and connectors, including crucial high voltage safety warnings.
Provides the electrical diagram for the cable connecting the power source to the WF-205 wire feeder.
Presents a detailed internal electrical schematic diagram of the Power Pulse welding unit.
To Next Page
