Weco Edge 580 User Manual

Dear Customer,
You have purchased an Edge 580 - Edge 550 edger and all the team at Weco would like to thank you for this
mark of your confidence.
The Edge 550 is a laboratory machine designed for opticians and is used for edging spectacle lenses.
Connected to an external server, the edger receives data relating to the assembly (shape).
We advise you to read this manual carefully and keep it near the machine in order to be able to refer to it
easily.
The information contained in this manual does not form a contract and can be modified without notice. This
document has been prepared with great care, but some unintentional errors or omissions may occur,
although every effort has been made to avoid them. Weco cannot, in any circumstances, be held responsible
for any possible operating defects that might result from such errors or omissions.
WECO DOES NOT GUARANTEE THE PERFORMANCE OF THE EDGE 580 - EDGE 550 IF THE
INSTRUCTIONS IN THIS DOCUMENT ARE NOT RESPECTD

Weco Edge 580 Specifications

General

Brand	Weco
Model	Edge 580
Category	Industrial Equipment
Language	English

Summary

INSTALLATION

Machine Unpacking Procedure

Step-by-step guide for safely removing the edger from its packaging and preparation.

External Clamp Removal

Instructions for removing securing screws before initial machine setup.

Water and Electrical Connections

Specifications and procedures for connecting the machine to water and power supplies.

Initial Edger Startup

Steps for powering on the machine and performing initial operational checks.

SAFETY PRECAUTIONS

General Safety Guidelines

Crucial safety rules for operators and machine handling to prevent injury or damage.

Operational Safety Tips

Practical advice for maintaining safe operation and machine longevity.

UTILIZATION

Edger and Application Screen Overview

Introduction to the edger's main parts and its user interface screen layout.

Standard Operating Procedure

Step-by-step guide for the typical workflow of using the lens edger.

User Interface Icon Guide

Explanation and purpose of all icons displayed on the edger's main application screen.

Special Cases in Operation

Procedures for specialized tasks like retouching, applying oversize, and manual finishing.

CONFIGURATION

Accessing Configuration Menus

Navigating the system to access settings, personalization, and adjustment menus.

Setting Default Finishing Parameters

Customizing default values for various lens finishing options to streamline workflow.

Adjusting Machine Setting Values

Procedure for calibrating and adjusting critical machine settings like lens feelers, sizes, and axes.

Configuring General Operating Parameters

Setting machine modes, language, and other general operational preferences.

MAINTENANCE

Edger Maintenance Task List

Recommended daily, regular, and periodic maintenance tasks for the edger.

Routine Edger Maintenance Procedures

Detailed steps for common maintenance tasks like changing parts and cleaning.

Machine Adjustment Procedures

Guides for calibrating and adjusting critical machine settings like lens feelers, sizes, and axes.

Edger Message Reference Guide

Explanation of all messages displayed by the edger, their conditions, and recommended actions.

TESTS

Diagnostic Test Menu Access

Overview of the edger's diagnostic functions and how to access them.

Typical Test Operation Principles

Understanding how to perform diagnostic tests on various machine components.

CHEMISTRIE™

Chemistrie™ Product Introduction

Information about Chemistrie™ magnetic click-on sunglasses and their application.

Chemistrie™ Lens Edging Process

Detailed steps for edging Rx and sun lenses for Chemistrie™ sunglasses.

TECHNICAL SPECIFICATIONS

Edger General Characteristics

Summary of the edger's main features, equipment, and operational capabilities.

Edge 580 and Edge 550 Specifications

Detailed technical data, power requirements, and safety standards for both Edge 580 and Edge 550 models.