EasyManua.ls Logo

Weed Eater 385080 - Page 11

Weed Eater 385080
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
all'CAUTION:Donotrunyourlawnmower
without rear mulcher plate or plug inplace
or approved grass catcher inplace. Never
attempt to operate the lawn mower with
the rear door removed or proppedopen.
/
Open mulcherdoor
Discharge deflector
\
I
GRASS CATCHER
(REAR BAGGING MODELS ONLY)
TO EMPTY GRASS CATCHER
Simply open rear door and lift grass
catcher up and away from mower.
NOTE: Do not drag the bag when
emptying. It will cause unnecessary wear.
_(_CAUTION: Under normal usage, the
catcher material is subject to deterioration
and wear and should, therefore, be
checked frequently for replacement. Any
replacement catcher should be checked
to ensure compliance with original
manufacturer's specifications.
_CAUTION: Do not run lawn mower
without the rear door, approved grass
catcher or clipping deflector in place.
Never attemptto operate mower with the
rear door removed or propped open.
SIMPLE STEPS TO REMEMBER WHEN
CONVERTING YOUR "COMBI-CUT"
LAWN MOWER
FOR MULCHING -
* Rear mulcher plate installed and rear
door closed.
* Mulcher door closed.
FOR REAR BAGGING -
. Rear mulcher plate removed.
, Grass catcher installed.
Mulcher door Closed.
FOR SIDE DISCHARGING -
* Rear mulcher plate installedand rear
door closed.
° Discharge deflector installed.
I
OPERATOR PRESENCE CONTROL
BAR
Your lawn mower is equipped with an op-
erator presence control bar which requires
the operator to be positionedbehind the
lawn mower handle inorder to start and
,_erate the fawn mower.
CAUTION: Federal regulations require
an enginecontrolto be installedon this
lawn mower in order to minimize the
risk of blade contact injury.Do not under
any circumstances attempt to defeat the
function of the operator control, The blade
turnswhen the engine isrunning.
11

Related product manuals