6
CONTAINER MOUNTING (See Fig. 4)
1. Install one container to left side first. Install other
container to right side.
NOTE: Left edge of right con tain er should always over lap
right edge of left con tain er at center sup port.
2. Close cover and lock latch over center support tube.
To lock and release latch, pull back on latch handle.
Fig. 4
CENTER
SUPPORT
TUBE
COVER
LATCH
HANDLE
CONTAINER
HANDLE
3
LOWER CHUTE (See Fig. 5)
1. Lift the mulch cover.
Fig. 5
4
LIFT
LINK
LOWER
CHUTE
MULCH
COVER
FRONT
LATCH
TAB
CAUTION: Do not operate the mower
without either the en tire grass cat-
cher, on mowers so equipped, mulch
cover, or the deflector shield in place.
2. Place slot in lower chute over mounting tab on mower
and position lower chute over mower opening as shown.
3. Hook rear latch around lift link on back of mower.
4. Hook front latch into tab hole on front of mower.
5. Rest the mulch cover on the lower chute.
To Next Page
Loading...
