BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE
EACH B 25 50 lEO SEASON STORAGE
USE HOURS HOURS HOURS , HOURS _ _ ,
V' V"
v' ....
J
v"
v'
NI i Check for Loose Fasteners ..................... _'
:Check/Replace Mower B!ade I] I
Check Transaxle Cooling
W Check Mower Levelness
R CheckV-Bell
iCheckEngine 0ti Leve_
E Change Engine Oil
N Clean Air Filter
? Clean Air Screen
Inspect Muffler/Spark Arreeter
EN Clean Engine Cooling Fins
Rap!ace Spark plug _,
Replace Air Filter Paper Cer_ri_ge
v"
v"
v,; ..... , ........
V#2 ............
V' : v'
t - Chnng9 mote of_tn when opo_ating undnr n hez_W lo_d or in high ambient tompotalures
2 - Servi¢o mote ol_n when operating in d_ty or dusty con_it_on_.,
3 -'Replace bla_3e more ldlen when mowing ie _,o_'_dyso_l
GENERAL RECOMMENDATIONS
The warranty on this riding mower does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain riding mower as instructed in this
manual.
Some adjustments wilt need to be made
periodically to properly maintain your riding
mower.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
At least once a year you should replace
the spark plug, clean or replace air filter,
and check blade and belt for wear. A new
spark plug and clean air filter assure proper
air-fuel mixture and help your engine run
better and last longer.
BEFORE EACH USE
t. Check engine oil level
2, Check brake operation,
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5_ Check for loose fasteners.
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings, lfyoufeelthey must be lubricated,
use only a dry, powdered graphite type lu-,
bricant sparingly.
16
To Next Page
Loading...
