Need help?Do you have a question about the weewell WTE220 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Response Time | 1 second |
| Display | LCD |
| Power Source | 2 x AAA batteries |
| Measurement Range (Body) | 32.0°C - 42.9°C |
| Measurement Range (Object) | 0°C - 100°C |
| Accuracy | ±0.2°C |
| Auto Shut-off | Yes |
Key safety guidelines for thermometer use, covering handling, environment, and usage restrictions.
Explains the thermometer's wide measurement range and multiple surface temperature uses.
Highlights the innovative infrared technology allowing ear temperature measurement in just one second.
Emphasizes the accurate and reliable ear temperature measurement provided by its advanced infrared sensor.
Focuses on the ergonomic design, making the thermometer simple and easy for users, including children.
Describes the product's feature to automatically display the last reading for 2 seconds when the unit is switched on.
Indicates all segments are shown for 2 seconds when the unit turns on.
Shows the last reading automatically for 2 seconds with the 'MEM' icon.
Shows unit is ready for measurement with °C or °F icon flashing.
Displays reading with °C or °F icon flashing, ready for next measurement.
Crossed-ear icon indicates reading is outside the normal range (32.0-42.2°C).
Steady battery icon flashes when unit is turned on, prompting battery replacement.
Displays (H) for measured temp over 100°C/212°F or ambient over 40°C/104°F.
Displays (L) for measured temp below 0°C/32°F or ambient below 10°C/50°F.
Indicates a system malfunction when 'Err' is displayed.
Blank display indicates a need to check battery loading and polarity.
Steady battery icon flashes, indicating batteries need replacement.
Body Temp: 32.0-42.9°C (89.6-109.2°F); Wide Temp: 0-100.0°C (32.0-212.0°F).
±0.2°C for body temp (32.0-42.9°C), ±1°C for other ranges.
Liquid Crystal Display indicating temperature units in 0.1 °C increments.
Signals for unit ready, measurement complete, and system errors.
Auto-displays the last measured temperature when the unit is switched on.
Display light activates for 4 seconds upon turn-on, and again for 5 seconds.
To Next Page
