WeGo PULSE - General Operations: Setting Parameters; Time and Date Setting; User Profile Configuration

6
WEGO
™
PULSE l User Manual
GENERAL OPERATIONS
TIME SETTING
Time set mode, Press S3 to select what parameter to
set. Press S1 to increase adjusts. Press and hold S1 to
fast increase adjust. Press S2 to decrease adjusts. Press
and hold S2 to fast decrease adjust. Press S4 to exit
setting. The setting sequence is T1/T2➔ Hour➔ Minute
➔ Second➔ Year➔ Month➔ Date➔ 12/24 H➔ Contrast.
USER SETTING
Press S3 to select what parameter to set. Press S1/
S2 to change the blinking digit. Press S1 to increase
adjusts. Press and hold S1 to fast increase adjust.
Press S2 to decrease adjusts. Press and hold S2 to fast
decrease adjust. Press S4 to exit setting.
S4
S3
S4
S3
S3 S3
S3
CONTRAST MINUTE
HOURT1/T2
S3
S3 S3
S3
S3 S3
S1/S2