10. Technical data
PrintJet II – Ink-Jet Printer
Application: Printing MultiCard markers
Technology: Ink-jet process
Print quality: Best photo (2880 dpi)
Printer drivers: Win 9X,Win NT, Windows 2000, XP
Print software: Recommended: M-Print 1.60
System requirements: Windows 95/98/NT/2000/XP
Feed: Manual loading
Fusing: Thermal fusing
Interfaces: Centronics and USB
Power supply: AC 230 V / 6 A or AC 115 V / 10 A
top fuse 10 A / fast fuse 230 VAC power circuit of the fusing unit
(12.5 A / fast fuse 115 VAC)
bottom fuse 2.5 A / fast fuse 230/115 VAC printer control
Operating location: Office conditions
Ambient temperature: 20 - 35 °C / 68 - 95 °F
Dimensions (L x W x H) 800 x 450 x 200 mm
Cartridge system: Ink cartridge, black (approx. 210 000 characters, Font: Arial, font size: 6)
Clean Unit (automatic and manual cleaning tool)
Range of supply: Power cord, printer driver, installation guide, CD, Clean Unit, Centronics cable
The average print capacity is approx. 400 MultiCards per month.
11. Ordering data
Designation Catalogue number
PrintJet 230 V: 1858990000
PrintJet 115 V: 1858980000
Replacement cartridge: 1858920000
Clean Unit: 1858950000
Guarantee
Weidmüller approves the following accessories and products for use with the PrintJet:
Designation Catalogue number
PJ Ink Cartridge 1858920000
PJ Clean Unit 1858950000
PrintJet-Loader 1813090000
All Weidmüller MultiCards MC terminal markers, MC cable markers, MC equipment markers
Please refer to our latest Weidmüller Catalogue to determine the type of MultiCard you require.
The use of other accessories or products can result in the following problems:
– poor print quality
– increased occurrences of paper jamming
– premature wearing out of the printer necessitating repairs.
Weidmüller’s guarantee and customer service agreement does not cover faults or damage to the printer resulting from the use of non-appro-
ved or unsuitable accessories or products. Therefore, we strongly recommend that you use the above mentioned accessories and products
only.
14