USERS MANUAL
FOR
WEIDMÜLLER PRINTJET
Contents
1. Introduction
2. Contents of supply
3. Safety advice
3.1. Safety instructions
3.2. Precautions
A. Using the PrintJet
B. Handling ink cartridges
C. Positioning the PrintJet
D. Print media
4. Setting up
4.1 Configuring the PrintJet driver
4.2 Basic settings in M-Print
5. PrintJet control panel
6. Replacing an ink cartridge
7. Error messages
8. Faults appearance
8.1 Clean/Check print head
8.2 Printing still appears faint despite cleaning
8.3 MultiCards are not drawn in or not fed
through the printer
8.4 MultiCards are not ejected correctly
9. USB Problems
10. Technical specification
11. Order data
12. CE
Sources of information
Installation Manual
This manual contains information on how to set up and begin
using the PrintJet. It also include information on configuring the
PrintJet and how to install the PrintJet software.
Users Manual
This manual provides information about operating the PrintJet.
It also includes advice on troubleshooting and information
regarding customer support.
1. Introduction
With this manual you receive important information for
installation and starting of the PrintJet.
They find here information about execute settings in the
printer driver and in the M-Software.
For further information, Help or actual driver will find
on our Homepage:
http://www.weidmueller.de/gb/downloads/PrintJet
Question and incitations you could send us via email
printjet@weimueller.de in urgent cases you could reach
us under our service number +49 (0) 52 31 14 12 52
2. Contents of supply
Please check your PrintJet if it complete.
• PrintJet
• Feed in- and feed out rail
• Parallel printer cable
• Power cable
• Clean Unit
• Short Installation Guide
• 2 MulitCards (Typ DEK 5/5)
• CD-Rom ( Printer Driver, Software, online Manauls)
Important:
For first install you must have the Weidmüller ink cartrid-
ge Article number 1797460000.
These Article is not included in the content of supply and
must be ordered separate.
To Next Page
Need help?
General
