Weidmüller MultiMark User Manual

MultiMark
THM MultiMark LPC
Original operating instructions

Weidmüller MultiMark Specifications

General

Print Technology	Thermal transfer
Resolution	300 dpi
Software Compatibility	M-Print PRO
Power Supply	100-240 V AC, 50/60 Hz
Connectivity	USB, Ethernet
Material Types	Polyester, Vinyl

Summary

About this documentation

Safety

General safety notes

General safety precautions related to electricity, moving parts, installation site, and personnel.

Intended use

Specifies the proper and improper uses of the labelling system.

Safety marking

Explains the various warning symbols attached to the labelling system.

Personnel requirements

Outlines requirements for personnel operating or maintaining the system.

Device description

Label printer

Overview of the label printer components and functions.

Mounting foot

Details the mounting foot used to position the printer.

Applicator

Describes the applicator unit with its components.

Technical data

Lists the technical specifications of the labelling system.

Type plate

Explains the information found on the device's type plate.

Unpacking and installing devices

Fitting the printer on the mounting foot

Step-by-step guide to mounting the printer onto the base.

Fitting the applicator on the printer

Instructions for attaching the applicator to the printer unit.

Connecting the devices

Details on how to connect the printer and computer/network.

Switching on the system

Procedure for powering on the complete labelling system.

Operating software

Touch display

Explains the functions and operation of the touch display interface.

Start screen

Describes the initial screen and its displayed operating status.

Menu navigation

Guides users through navigating the printer's menu structure.

Setting up the printer

Positioning the material reel on the reel holder

Instructions for loading the label material reel correctly.

Placing labels in the print head

Steps to guide labels into the print head assembly.

Inserting the transfer foil

Procedure for inserting the transfer foil correctly.

Adjusting the head locking system

Details on adjusting the print head locking mechanism.

Adjusting the transfer foil run

How to adjust the transfer foil path to prevent creasing.

Printing

Synchronising the paper run

Explains the process of synchronizing the label feed for accurate cutting.

Cleaning

Cleaning the print roller

Instructions for cleaning the print roller.

Cleaning the print head

Procedures for cleaning the print head.

Cleaning the label light barrier

Steps to clean the label sensor.

Troubleshooting

Error display

Explains the error messages shown on the touch display.

Printer error messages

Lists printer error messages, their causes, and corrective actions.

Printer problem solving

Provides solutions for common printer problems.

SQ laser applicator

Configuration

How to configure the SQ laser applicator settings.

Test mode without print job

Simulating applicator operation without actual print data.

Test mode with pending print job

Testing the applicator with real print data.

Normal operation

Guidelines for operating the SQ laser applicator normally.

Applicator error messages

Lists applicator error messages, causes, and corrective measures.

Setting up the laser pointer

Align the laser

Calibrating the laser pointers to precisely surround the label area.

Fasten the object

Instructions for securing the object on the holder.

Decommissioning and disposing of the system

Decommissioning the system

Steps required to safely shut down and prepare the system for disposal.

Disposing of the system

Guidance on proper disposal according to regulations.

Annex