32903400000/00/09.2022
Contents
1 About this documentation 4
2 Safety 5
2.1 General safety notes 5
2.2 Intended use 5
2.3 Safety marking 6
2.4 Personnel 6
3 Device description 7
3.1 Label printer 8
3.2 Mounting foot 9
3.3 Applicator 10
3.4 Technical data 11
3.5 Type plate 12
4 Unpacking and installing devices 13
4.1 Fitting the printer on the mounting foot 13
4.2 Fitting the applicator on the printer 14
4.3 Connecting the devices 14
4.4 Switching on the system 14
5 Operating software 15
5.1 Touch display 15
5.2 Start screen 15
5.3 Menu navigation 17
6 Setting up the printer 18
6.1 Positioning the material reel on the reel holder 18
6.2 Placing labels in the print head 18
6.3 Inserting the transfer foil 19
6.4 Adjusting the head locking system 19
6.5 Adjusting the transfer foil run 20
7 Printing 21
7.1 Synchronising the paper run 21
8 Cleaning 22
8.1 Cleaning the print roller 22
8.2 Cleaning the print head 22
8.3 Cleaning the label light barrier 23
9 Troubleshooting 24
9.1 Error display 24
9.2 Printer error messages 25
9.3 Printer problem solving 27
10 SQ laser applicator 28
10.1 Conguration 28
10.2 Test mode without print job 30
10.3 Test mode with pending print job 30
10.4 Normal operation 31
10.5 Applicator error messages 32
11 Setting up the laser pointer 34
12 Decommissioning and disposing of the system 36
12.1 Decommissioning the system 36
12.2 Disposing of the system 36
13 Annex 37
To Next Page
Loading...
