Setting up the printer
2903400000/00/09.202220
6.5 Adjusting the transfer foil run
Creases in the transfer foil run can lead to errors in the
print image. To avoid creasing, the transfer foil deection
(3) can be adjusted.
It’s best to perform this adjustment during print
operation.
Hexagon key
3
1
2
Image 6.6 Adjust the transfer foil run
► Read the current setting on the scale (1) and note this
down.
► Turn the screw (2) and observe the behaviour of the foil.
Turning in the + direction tensions the inner edge of the
transfer foil.
Turning in the – direction tensions the outer edge of the
transfer foil.
Incorrect adjustment of the head locking system
can also cause creases in the foil run.
To Next Page
Loading...
