Weidmüller MultiMark - Operating software; Touch display; Start screen

152903400000/00/09.2022
5 Operating software
5.1 Touch display
The touch display lets you operate the printer’s operating
software and execute the following functions:
– Pause, continue or cancel print jobs
– Set print parameters, e.g. heat energy of the print head,
print speed, conguration of the interfaces, language
and time ( conguration instructions),
– Control the stand-alone operation with memory device
( conguration instructions),
– Perform a rmware update ( conguration instructions)
Several functions and settings can also be controlled by
printer-specic commands with software applications or by
direct programming with a computer. Details  program-
ming instructions.
Settings changed on the touch display are the label print-
er’s base setting.
To adjust the print jobs, any adjustments should
take place in the software.
► To open a menu or select a menu item, tap on the rel-
evant icon.
► To scroll, move one nger up or down on the touch dis-
play.
5.2 Start screen
The start screen shows the relevant operating status.
After switching on During printing
In pause mode After a print job
Open the menu
Pause or continue a print job
Repeat last label
Cancel and delete all print jobs
Label feed
Image 5.1 Buttons on the start screen