Safety
2903400000/00/09.20226
2.3 Safety marking
Various warning symbols are attached to the labelling
system. These symbols must not be removed and must
always be legible.
1
2
Image 2.1 Warning symbols on the device
1
Cylinder under pressure, residual energy is
possible even when switched o!
2
Risk of crushing due to the movement of the
stamp!
2.4 Personnel
Only trained personnel may operate the labelling system and
carry out maintenance work. They must also have read the
operating instructions in their entirety.
Repairs may only be carried out after consul-
tation with Weidmüller Service and only by a
qualied electrician.
Please keep the operating instructions
where they can be viewed by the operating
personnel at all times.
All documents can also be downloaded from
the Weidmüller website.
To Next Page
Loading...
