EasyManua.ls Logo

Weightworld CIRCULATOR - Package Content; Charging the Circulator; Charging related warnings; Technical Specification

Weightworld CIRCULATOR
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document No.: CWL-URM-04A | Revision No.: 00. | Revision Date: 20.06.2022
Document No.: CWL-URM-04A | Revision No.: 00. | Revision Date: 20.06.2022
11 12
5. Package Content
Circulator (Nerve & Muscle Stimulator) Device
Electrode Patches
Electrode Patches Cable
DC USB Cable
User Manual
Circulator (Nerve & Muscle Stimulator) Bag
The device packaging consists of the following inclusive content:
6. Charging the Circulator (Nerve and muscle stimulator)
Place charger output pin in Circulator (Nerve & Muscle Stimulator) charging slot.
Plug the charger into any working 110V 50/60Hz or 220/240v 50/60Hz mains electrical outlet.
Both the Glowing Green and Red Light indicates that the charging is on.
When the device is fully charged, it indicates the 'Solid Green' light.
Your device will be fully charged in 4 1/2 hours.
When the battery is low, it is indicated by short beep sound and when the battery is
completely discharged it is indicated by a long beep sound.
7. Charging related warnings
Charging with any other types of DC USB Cable may damage the device.
Usage of any other attachment that is not with your charger may result in electric
shock or injury to people.
Shortening the terminal of the charging socket or plug may cause permanent
damage to the device,
To ensure the optimum battery performance, always store the device in a fully charged state.
Model
Dimensions
Weight
No. of Programs
Input Voltage
Input Power
Chargeable
Circulator
458 mm x 343 mm x 72 mm
2 kg with Box Pack
2 (PI-EMS, P2-TENS)
5VDC
10 Watt
Yes
Working Time 30 min
Mode of Machine 1
Operational Frequency 0-99Hz
Delay Frequency 300ms
Batteries Lithium ion batteries
Accessories Electrode Patches Cable,
DC USB Cable and Electrode Patches
Operating conditions: 41°F - 104°F (5°C - 40°C), 30% — 75% RH,
700 hPa - 1060 hPa atmospheric pressure
Transportation and storage environment: 14°F - 122°F (-10°C - 50°C), 10% - 90% RH,
700 hPa - 1060 hPa atmospheric pressure
Name of product
Circulator
(Nerve and Muscle Stimulator)
Electrode patches
Foot pads
BF
BF
Applied parts Applicable type verification
Applied parts
8. Technical Specification
Electrode patches
Foot pads
BF
BF
Applied parts Applicable type verification