1-6 Weinig Tools Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG AG
This manual applies exclusively for Weinig tools.
Further information, technical data and ordering data concerning the Weinig tools can be found
in the catalogue of Weinig accessories.
Training
No-one may work with the Weinig tools and Weinig machines, not even for a brief period,
without the requisite training either within the company, by our field staff, by vocational
training institutes or in the Weinig Training Centre.
Symbols
These symbols refer to general and specific hazards. Some symbols are
also to be found on the machine. These symbols must be noted and must
remain clearly legible at all times. Never remove any stickers from the
machine.
Danger – This symbol draws attention to exceptional hazards which will invariably lead
to very serious injury if the instructions are disregarded and precautions are not taken.
Warning – This symbol draws attention to a potential hazard which can lead to very
serious injury if precautions are not taken.
Caution – This symbol draws attention to hazardous situations which may lead to
physical injury, damage to the machine or other property or to loss of data (control
systems).
This symbol draws attention to additional information for working, tips for correct
operation.
This symbol draws attention to further instructions, instruction modules, enclosures or
third-party manuals which must be observed.
DANGERDANGER
Foreword, symbols
To Next Page
Loading...