OWNERS MANUAL FOR WEISS MEDEA+ D/A CONVERTER
Page: 21 Date: 02/11 /dw
Technical Data
Digital Inputs:
(3) XLR connectors, (1) Toslink connector (optical)
(4) RCA connectors
All inputs accept professional or consumer standard , i.e. accept AES/EBU or S/PDIF signals
Sampling Frequencies: single wire scheme: 44.1, 48.0, 88.2, 96.0, 176.4 or 192kHz on any of the four inputs
Sampling Frequencies: dual wire scheme: 88.2, 96.0, 176.4 or 192kHz on inputs 1 and 2
Sampling frequency tolerance: +-80ppm
Maximum input wordlength: 24 Bits
Analog Outputs:
(2) XLR Connectors
(2) RCA Connectors
Servoless, DC coupled, short circuit proof output circuitry
Output impedance: < 100 Ohm
Output level: variable from -4.0dBu to +27.0dBu balanced on XLR connectors
(-10.0dBu to +21.0dBu unbalanced on RCA connectors) with 0dBFS input, in 1dB steps
(-4dBu is 0.49V, +27dBu is 17.35V, -10dBu is 0.245V, +21dBu is 8.67V)
Output stage: Discrete Class A
To Next Page
Loading...
Need help?
General
