OWNERS MANUAL FOR WEISS MEDEA+ D/A CONVERTER
Page: 18 Date: 02/11 /dw
Operation
Unpacking and Setup of the MEDEA+
Carfully unpack the MEDEA+. The following items should be enclosed:
• The MEDEA+ D/A Converter unit
• This Owners Manual
• A Certificate of Guarantee
The MEDEA+ should be placed horizontally on a plane surface. Avoid putting any other equipment
or any other material on top of the MEDEA+ as not to compromise the MEDEA+’s heat convection
system.
Mains Connection
Before connecting the mains cable make sure the voltage selector switch on the back of the unit
(integrated into the mains connector) is set to the appropriate voltage. If this is not the case then
open the mains selector lid with a strong screwdriver. The mains plug must not be plugged into the
connector for that purpose. Now you see a black selector drum with appropriate voltages written in
white letters. Remove this drum, turn it to the appropriate voltage and reinsert it. Now firmly close
the lid again. Connect the MEDEA+ to the wall outlet with the mains cable.