5
CONTENTS OF SHIPPING CONTAINER
1 WM180V Lathe
1 Ɏ100mm Three Jaw Chuck
1 Ɏ100mm Four Jaw Chuck (with backplate)
1 Steady Rest
1 Follow Rest
1 Face Plate
1 Operator’s Manual
1 Test Flow Chart
1 Toolbox
TOOLBOX CONTENTS (Fig. 1 )
1 V-belt Gates-5M-365
1 Dead Center MT3
1 Dead Center MT2
3 External Jaw
1 Oil Gun
1 Cross Screwdriver Fig. 1
1 Flat Screwdriver
1 Key for 3-Jaw Chuck
1 Key for 4-Jaw Chuck
5 Hex Socket Wrench 3,4,5,6,8mm
3 Double End Head Wrench 8-10mm, 10-12mm, 17-19mm
9 Change Gears 25T,30T,33T,35T,40T,45T,50T,52T,66T
WARNING!
Read and understand the entire contents of this
Manual before attempting set-up or operation!
Failure to comply may cause serious injure!
!
To Next Page
Loading...