46 Printing 226-Hz results Welch Allyn MicroTymp3 portable tympanometric instrument
Print interpretive messages (Switch #2)
Print tympanogram only or tympanogram and data (Switch #3)
Manufacturing switch (Switch #4)
No messages
Depress the ON portion of the switch to select this option.
This causes messages which interpret the tympanogram to
not be included on the printout.
Refer to the Printout formats section on page 42 for more
information on these messages.
Messages
Depress the OFF portion of the switch to select this option.
This causes the messages which interpret the
tympanograms to be included on the printout.
Tympanogram only
Depress the ON portion of the switch to select this option.
Only the tympanogram and the GR (Width) numeric value will
print.
Tympanogram and data
Depress the OFF portion of the switch to select this option.
Both the tympanogram and its corresponding numeric data
will print.
This switch is used during manufacturing only. Leave this
switch in the OFF position. The Printer/Charger will not
operate normally if this switch is on.
To Next Page
Loading...
Need help?
General
