Need help?Do you have a question about the Welch Allyn Spot Vital Signs 4400 and is the answer not in the manual?
General| Blood Pressure Measurement | Oscillometric |
|---|---|
| Display | LCD |
| Device Type | Blood Pressure Monitor |
| Connectivity | Bluetooth, USB |
| SpO2 Range | 70% to 100% |
| NIBP Diastolic Range | 20 to 195 mmHg |
| Power | Rechargeable lithium-ion battery |
| Measurement Parameters | NIBP, SpO2, Pulse Rate, Temperature |
| Cuff Size | Adult, Large Adult, Pediatric |
Defines symbols used for documentation in the manual.
Defines symbols related to power and battery status indicators.
Provides essential safety warnings for proper device usage.
Outlines general safety practices for device operation and maintenance.
Details precautions to prevent damage from static electricity.
Defines the manual's objective, scope, and intended audience.
Information on available technical support and service options.
Specifies periodic maintenance schedules for device components.
Introduces the software tool for device maintenance and calibration.
Details battery specifications, usage, and best practices for longevity.
Identifies controls and indicators on the front-left side of the device.
Provides steps to access the device's advanced settings menu.
Settings for language, date, time, and open source software disclosure.
Settings for physiological parameters and additional patient data.
Settings and features for device installation and troubleshooting.
Describes the device's power-on self-test (POST) and startup process.
Explains the various functions of the device's power button.
Instructions for powering on the device and performing initial checks.
Procedure to properly power down the device safely.
Contains notes and cautions for reassembly after component replacement.
Lists necessary tools for disassembly and repair procedures.
Provides torque specifications for screws during reassembly.
Describes various connector types encountered during disassembly.
Provides a flowchart overview of the complete device disassembly process.
Instructions for detaching the device from its mobile stand.
Instructions for detaching the device from the desk stand.
Instructions for detaching the device from a wall panel mount.
Illustrates the device's components and their relationships.
Step-by-step guide to safely remove the device's battery.
Procedure for removing the rear casing of the device.
Steps to disconnect and remove the internal power harness.
Instructions for removing the SureTemp temperature sensing module.
Guide to disconnecting the SureTemp module's ribbon cable.
Steps to remove the SpO2 sensor board.
Procedure to remove the SpO2 adapter board.
Instructions for detaching the main PCA board from the front casing.
Steps to carefully detach the LCD screen from the main PCA board.
Instructions for reconnecting the LCD screen to the main PCA board.
Details on securing the LCD flex cable and ferrite with tape.
Procedures for removing the device's sensor housing.
Steps to detach and remove the pneumatic pump assembly.
Guide for replacing the main PCA board, including service tool usage.
Instructions for removing the SpO2 sensor insert.
Steps for removing the rubber bezel from the front casing.
Instructions for reinstalling the front housing bezel.
Steps to remove the end cap from the SureTemp probe.
Instructions for removing the device's power switch.
Steps for reinstalling the device's power switch.
Instructions for removing the power supply unit from its stand.
Explains the purpose and usage of service kits for parts.
Provides a detailed list of service kits with material numbers and descriptions.
Procedure for cleaning up liquid spills on the device.
Instructions for drying device components after cleaning.
Guidelines for storing the device to maintain its condition.
Explains the purpose of functional verification and calibration tests.
Details the different editions and capabilities of the Welch Allyn Service Tool.
Lists tests performed by the standard edition of the service tool.
Lists tests performed by the Gold edition of the service tool.
Recommendations for electrical safety testing procedures.
Describes basic functional verification checks for device parameters.
Lists the necessary tools for performing basic functional verification.
Diagram and instructions for setting up NIBP testing equipment.
Overview of NIBP leak test, overpressure, and accuracy checks.
Procedure for performing the NIBP leak test using the service tool.
Step-by-step guide to execute the NIBP leak test.
Procedure for verifying NIBP overpressure protection.
Step-by-step guide to execute the NIBP overpressure test.
Procedure for manually checking NIBP accuracy.
Step-by-step guide to execute the NIBP accuracy check.
Procedures for testing the device's SpO2 function.
Diagram and instructions for setting up SpO2 testing equipment.
Steps to test the device's SpO2 function accuracy.
Procedures for testing the device's thermometry function.
Diagram and instructions for setting up thermometry testing.
Procedure for testing the SureTemp temperature system.
Step-by-step guide to perform the SureTemp system test.
Instructions for setting up the calibration tester.
How to adjust the set point on the calibration tester.
Tests the temperature probe and system functionality.
Template for recording test results and service information.
Diagram for connecting equipment for full verification and calibration.
Lists tools required for comprehensive device testing and calibration.
Procedure to initialize the NIBP board after replacement or calibration.
Lists the available model configurations and options.
Guide for upgrading device firmware using the Welch Allyn Service Tool.
Explains how to revert to previous software versions.
Step-by-step instructions for updating device firmware.
Information on Welch Allyn's service and support programs.
Details available training for service personnel.
Technical specifications for the device, including physical and electrical.
Details device dimensions, weight, and protection classifications.
Provides specifications for the device's battery.
Detailed specifications for the Non-Invasive Blood Pressure (NIBP) module.
Specifications for the SureTemp Plus temperature measurement module.
Specifications for the SpO2 (Oxygen Saturation) monitoring module.
Operating and storage conditions for temperature and humidity.
Requirements for compatible USB flash drives.
Settings that are default upon manufacturing.
User-configurable parameters for device settings.
Specific manual parameter settings for the NIBP module.
Specific manual parameter settings for the Temperature module.
How to read and understand device error log files.
Lists common symptoms, causes, and suggested actions for troubleshooting.
Steps to save device log files to a USB flash drive.
Procedure to access and analyze saved log files from a USB drive.
Troubleshooting guide for NIBP-related symptoms and their solutions.
Troubleshooting guide for temperature measurement symptoms.
Troubleshooting guide for failed software upgrade attempts.
Troubleshooting guide for SpO2 measurement symptoms.
Tables detailing device messages, causes, and suggested actions.
Lists NIBP-related messages, their causes, and suggested actions.
Lists SpO2-related messages, their causes, and suggested actions.
Lists messages related to the Nonin SpO2 sensor.
Lists temperature-related messages, their causes, and suggested actions.
Further details on temperature module error messages.
Messages related to patient data saving and management.
General system error messages and suggested actions.
Lists tools for verification, calibration, and maintenance.
Lists general test equipment needed for device service.
Lists tools specifically for NIBP functional verification and calibration.
Lists tools for SpO2 configuration and verification.
Lists tools for SureTemp Plus temperature configuration and verification.
Lists general miscellaneous tools required for service.
Details IT requirements for the Welch Allyn Service Tool.
Lists file types for outbound data transfer.
Lists file types for inbound data transfer.
To Next Page
