What to do if Welch Allyn Blood Pressure Monitor cuff does not inflate properly?
If your Welch Allyn Blood Pressure Monitor cuff isn't inflating correctly, first ensure the cuff's tube is securely connected to the device. If it's still not working, inspect the tube and bladder for any cracks or leaks. If you find damage, you may need to replace the blood pressure cuff.
How to troubleshoot no power on Welch Allyn ProBP 2400 Blood Pressure Monitor?
If your Welch Allyn Blood Pressure Monitor has no power and the LCD display is blank, check that the power supply is properly plugged into the wall socket. Also, the battery might be fully discharged; try recharging it by plugging in the power supply.
Why no result displayed after measurements on Welch Allyn ProBP 2400?
If your Welch Allyn Blood Pressure Monitor isn't displaying any results after taking measurements, it might be in Manual Mode. Try switching the device to «1x» or « » Mode and repeat the measurements.
General| Measurement Method | Oscillometric |
|---|---|
| Display | LCD |
| Power Source | 4 AA batteries or AC adapter |
| Pulse Rate Accuracy | ±5% of reading |
| Device Type | Automatic Blood Pressure Monitor |
| Blood Pressure Accuracy | ±3 mmHg |
| Connectivity | USB |
| Pressure Range | 0 to 300 mmHg |
| Pulse Rate Measurement Range | 40 - 180 beats per minute |
| Pulse Rate Range | 40 - 180 beats per minute |
Describes the device's purpose, measuring technique, and suitability for specific patient groups.
Identifies and labels the main components and parts of the ProBP 2400 device.
Instructions on how to connect the power plug to the power adapter for charging.
Guidance on charging the device's battery before first use until the indicator turns green.
Guide to choosing the appropriate cuff size based on patient's upper arm circumference.
Procedure for powering on the ProBP 2400 device.
Instructions for connecting the blood pressure cuff to the device.
Guidance on selecting the desired maximum inflation pressure or using the automatic setting.
How to choose between 1x, Manual, or 3x measurement modes.
Explanation of how the device measures and displays Mean Arterial Pressure (MAP).
Describes the function and symbol for detecting irregular heartbeats during 1x mode measurements.
How to stop the measurement sequence early in 3x mode.
Method to skip countdown timers between measurements in 3x mode.
Information about the built-in rechargeable battery and its capacity.
Steps for connecting and using the power adapter to charge the device.
General safety guidelines for device usage, handling, and protection.
Instructions for removing, washing, and drying the blood pressure cuff.
Steps to prepare the device and external equipment for the accuracy test.
Declaration regarding electromagnetic emissions and compliance with standards.
To Next Page