EasyManua.ls Logo

Welch Allyn ProBP 2400 - Initial set up; Attaching the power plug to the power adapter; Charge the battery completely

Welch Allyn ProBP 2400
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
13
Welch Allyn ProBP 2400 digital blood pressure device
Initial set up
Attaching the power plug to the power adapter
Select a proper power plug and attach to the power adapter as
shown below.
Charge the battery completely
When using for the rst time, charge the battery until the
recharge indicator on the device turns to green.
F
Refer to page 27 for the section of “Using a power adapter“.
F
Refer to page 27 for the section “Rechargeable Battery“

Related product manuals