Welch Allyn SureTemp 4 Directions For Use

INTRODUCTION
The Welch Allyn 767 SureTemp 4™ is a wall mounted
thermistor thermometer to be used for measuring patient
temperatures ranging from 84 °F to 108 °F (28.9 °C to
42.2 °C). Oral and rectal probes utilize single-use dis-
posable probe covers which limit cross-contamination.
Oral and rectal temperatures are taken using Normal or
Monitor operating modes. Axillary temperatures are
taken with an oral probe with the unit operating in the
Monitor mode. In the Normal mode, the thermometer’s
microprocessor “predicts” body temperature in about 4
seconds for oral temperatures and in about 15 seconds
for rectal temperatures. The Monitor mode continuously
displays the temperature of the probe which will reflect
the patient’s actual temperature in about 3 minutes and
will continue for as long as the probe remains in place.
SAFETY & WARNINGS
CAUTION: DISCONNECT THE SYSTEM FROM THE
MAINS SUPPLY BEFORE CONNECTING THE 767
SURETEMP 4 THERMOMETER.
USE THE 767 SURETEMP 4 WITH WELCH ALLYN
3.5V 767 SERIES WALL TRANSFORMER ONLY.
DO NOT USE IN THE PRESENCE OF FLAMMABLE
ANESTHETICS.
1

Welch Allyn SureTemp 4 Specifications

General

Brand	Welch Allyn
Model	SureTemp 4
Category	Diagnostic Equipment
Language	English