Step 9: Remove the screws Step 10: Remove grid from the unit.
Step 11: Remove the screws Step 12: Gently lift and remove the
evaporator out of the way for easier
cleaning.
----------------------------------------------------------
Step 13: Remove these screws pictured above in order to remove the ice tray
liner. Two of them are hidden under the ice tray and a stubby-nose screw
driver is needed.
Step 14: Remove plastic plugs and
pull the ice bin liner out of the unit
Step 15:
If you have not already, mix a
solution of 1 part hydrogen peroxide
to 5 parts water and put it in a spray
bottle. Spray all ice making/ storage
surfaces liberally and wipe clean
with a soft rag.
Never use anything abrasive on any
of the ice making or storage
surfaces
Step 7: Remove the screws
Step 8: Slide the ice tray out of the
unit.
To Next Page
Loading...
