How to fix WELLSYSTEM RELAX when there is no power supply?
First, check if the mains plug of your WELLSYSTEM Massager is properly connected to the mains socket and ensure that the fuse or cut-out is switched on. If the issue persists, it is recommended to contact customer service for further assistance.
What to do if WELLSYSTEM Massager water temperature is too high?
If the water temperature of your WELLSYSTEM Massager is too high (above 45°C), reduce the pressure or switch off the unit. If you have a cooling system, ensure the water tap is open and the water shut-off valve is not activated. Also, inspect the supply and drainage lines for any kinks. If problems persist, contact customer service.
What to do if WELLSYSTEM RELAX Massager shows chip-card reading error?
If you are getting a reading error with the chip-card in your WELLSYSTEM Massager, ensure that the card is inserted correctly. If the problem continues, try using a different, known valid card.
What to do if WELLSYSTEM Massager says chip-card is invalid?
If your WELLSYSTEM Massager indicates that the chip-card was inserted incorrectly or is no longer valid, first, ensure that the card is correctly inserted. If the issue persists, try using a valid card.
What to do if WELLSYSTEM RELAX Massager shows empty chip-card error?
If your WELLSYSTEM Massager indicates that an empty programmable chip-card has been inserted (meaning no massage program is stored on it) or that the card might be defective, load a program onto the card. Alternatively, try using a different card.
How to fix WELLSYSTEM Massager when program cannot be written on the card?
If you cannot write a program on the chip-card for your WELLSYSTEM Massager, try changing the card.
Provides contact details for customer support and service inquiries.
Lists the manufacturer's details and contact information.
Details the proper and intended applications of the device.
Lists prohibited uses of the device to prevent damage or injury.
Details the physical components and features of the massage device.
Details the physical components and features of the headset unit.
Offers advice and guidance for effective use of the device.
Explains the controls and interface of the main massage unit.
Outlines safety guidelines and precautions during maintenance.
Describes common errors and troubleshooting steps.
Provides procedures for cleaning and disinfecting the device.
Details the electrical specifications and weight of the device.
Specifies requirements for water and cooling systems.
Allows configuration of device settings for massage.
Allows configuration of headset settings.
Outlines the process for making warranty claims.
Details the steps and requirements for warranty claims.
General| Brand | WELLSYSTEM |
|---|---|
| Model | RELAX |
| Category | Massager |
| Language | English |
To Next Page
