Cleaning and maintenance
07/2019 1020982-00 Operating instructions – 41/60
Maintenance performed by authorized, trained and qualified staff
WARNING!
Danger to persons from maintenance work that has not
been carried out!
If maintenance work is not carried out, it can lead to material
damage or personal injuries!
– Maintenance work ma
onl
be carried out b
personnel
who have been authorized, trained and qualified by JK
Products & Services!
– The studio operator is responsible for compliance with
the maintenance intervals!
The maintenance work must be carried out in accordance with checklist
1018814-.. by a JK Factory Certified Technician at the manufacturer or by
personnel who have been authorized, trained and qualified by the manufac-
turer.
The correctly carried out maintenance work must be entered and confirmed in
checklist 1018814-...
The maintenance work must be carried out at the following intervals:
Annually or every 2000 hours, whichever is sooner.
Every 3000 hours
After 5 years or 4,000 hours, whichever is sooner.
After 8 years or 6,500 hours, whichever is sooner.
Once the age of the device reaches ten (10) years from the date of manufac-
ture, its condition must be assessed by a (level 4) JK Factory Certified Tech-
nician before use of the device can be continued.
Failure to have this device assessment performed may result in personal
injury or property damage.
Any liability is excluded if use of the device continues ten (10) years after the
date of manufacture, without the "condition assessment" having been per-
formed.
To Next Page
Loading...
