Wellue BP2A - Page 25

23
rating of the
transmitter in
watts (W)
according to the
transmitter
manufacturer
and d is the
recommended
separation
distance in
meters (m).
Field strengths
from fixed RF
transmitters, as
determined by
an
electromagnetic
site survey a,
should be less
than the
compliance level
in each
frequency range
b.
Interference
may occur
in the vicinity of
equipment
marked with the
following
symbol:
Note 1: At 80 MHz to 800 MHz, the separation
distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all
situations. Electromagnetic propagation is affected by