Need help?Do you have a question about the Wellue viatom ER1 and is the answer not in the manual?
Lists the components included in the ER1 monitor box.
Indicates the correct orientation for placing the device.
Explains the meaning of different LED light states and flashes.
Describes the electrode connection points for various accessories.
Details the port for connecting the power/data cable.
Instructions for initial device activation after unpacking.
Steps to charge the device's built-in rechargeable lithium battery.
Instructions for attaching the device using disposable electrodes.
Instructions for attaching the device using the chest strap.
Details how the device begins acquiring ECG data automatically.
Explains how the device stops recording and saves data after removal.
Step-by-step guide to install the ECG browser software from the USB drive.
Procedure for registering a new user account and logging into the ECG browser.
Steps to download data, create a user, and initiate ECG analysis.
General safety precautions and warnings for using the device.
Disclaimers regarding medical diagnosis and use of results.
Precautions regarding operating conditions and environmental factors.
Solutions for issues related to normal data acquisition.
Troubleshooting steps for excessive interference in ECG waveforms.
Solutions for problems importing recorded data into the analysis software.
Detailed technical specifications for the ER1 Heart Health Monitor.
Hardware and OS requirements for installing and running the ECG browser software.
General| Display | OLED |
|---|---|
| Lead Type | Single-lead |
| ECG Channel | 1 |
| Sampling Rate | 250 Hz |
| PR Measurement Range | 30-250 bpm |
| Charging Time | 2 hours |
| Connectivity | Bluetooth |
| Compatibility | iOS and Android |
| Water Resistance | IP22 |
| Weight | 30 g |
| Measurement Parameters | ECG |
| SpO2 Measurement Range | 70% - 100% |
| PI Measurement Range | 0.1%-20% |
| Accuracy | SpO2: ±2% |
To Next Page
