Weltem Icen WPC-7000 User Manual

2
Owner’s Manual WPC-7000 / 9000
SpecificaƟons (ConƟnued)
Model No.
Seng temperature
(Room cool mode) °F( °C)
Seng temperature
((Spot cool mode) °F( °C)
WPC-7000
64~86 (18~30) 32~86 (0~30)
WPC-9000
Model No.
Applicaon Area
(Room cool mode) ²(m²)
Refrigerant
Type / oz(g)
Design Pressure -
Hi/Low Psig
WPC-7000 743 (70) R-410A / 44.5(1260) 450 / 280
WPC-9000 1300 (100) R-410A / 61(1730) 450 / 250
Model No.
Indoor Air Flow
(High/Low)CFM(CMH)
Wheels
pcs / diameter
Hot Air Duct Diameter
In.(mm)
Maximum Duct
Length (m)
WPC-7000 741 / 635 (1259 / 1078)
4 / 102mm 16 (400) 60 (18)
WPC-9000 882 / 776 (1499 / 1318)
Safety Devices
Compressor overload protector, An-freezing thermis-
ter, Full drain tank switch, Automac restart (Power
interrupon), Compressor me delay program, High
pressure switch
Features
Temperature control, Self-diagnosc funcon, Two
speed fan, Oponal drain pump kit, Washable filters, °F(
°C) display, Off-mer
General Safety InformaƟon
Please read this manual carefully for instrucons on correct installaon and usage. Please read
all safeguards.
1. Transport and store the unit in an upright posion only. Leave unit in an upright posion for at
least 3 hours before first use.
2. Always place the unit on an even, level surface.
3. Ensure the unit is connected to a grounded power supply of the correct rang / capacity.
4. The unit will cool when the room temperature is between 18°C (64°F) ~ 45°C(113°F) depend-
ing on the thermostat seng.
5. DO NOT use this unit for funcons other than those described in this instrucon manual.
6. DO NOT lt the unit.
7. DO NOT cover or obstruct the unit’s inlet and outlet grilles.
8. DO NOT use the unit in areas where it will be exposed to rain or water.
9. NEVER unplug the unit while it is operang.
DO NOT use the unit in wet environments, such as a laundry room, to avoid
the risk of electrical shock.

Weltem Icen WPC-7000 Specifications

General

Brand	Weltem
Model	Icen WPC-7000
Category	Air Conditioner
Language	English