EasyManuals Logo

Weltem Icen WPC-7000 User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Owners Manual WPC-7000 / 9000
Maintenance (ConƟnued)
To ensure your product is covered by warranty, the complete faulty product along with your
original purchase receipt must be provided at the place of purchase.
Product Portable Air CondiƟoner
Model No.
Date of Purchase
Place of Purchase
Serial No.
Period of Warranty
Customer: Please read and keep this
manual for future reference and keep
sales receipt as proof of purchase.
SPRING REPLACEMENT
(See Figure 10)
SELF-DIAGNOSTIC CODES
(See Table 1)
The alarm light is acvated if abnormal operaon occurs, and a code is displayed on the control
panel. The compressor and condenser fan motor will stop operang. The evaporator fan will con-
nue to run for 3 minutes. If the fault is reced within 3 minutes, the unit will resume opera-
on. If the fault persists for more than 3 minutes, the evaporator fan also stops. The fault must
be reced before the unit can resume normal operaon.
There are two springs on the rear of condensate water tank guide.
1. Release the screw on the spring hook.
2. Take o the spring hook, and then pull out the opposite spring
hook from hole in the condensate water tank guide.
3. Replace with a new spring in reverse order.
4. Repeat this cycle for the other spring.
Figure 10 – The process of
spring replaccement

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Weltem Icen WPC-7000 and is the answer not in the manual?

Weltem Icen WPC-7000 Specifications

General IconGeneral
BrandWeltem
ModelIcen WPC-7000
CategoryAir Conditioner
LanguageEnglish

Related product manuals