Wen 34035

14" x 20" VARIABLE
SPEED WOOD LATHE
Instruction Manual
MODEL 34035
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM1-800-232-1195 (M-F 8AM-5PM CST)
For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM

Wen 34035 Specifications

General

Brand	Wen
Model	34035
Category	Lathe
Language	English

Summary

Contact and Support Information

General Safety Rules

Work Area Safety Guidelines

Electrical Safety Precautions

Rules for safe use of electrical power, plugs, cords, and grounding.

Personal Safety Measures

Guidelines for operator alertness, PPE, and safe operating practices.

Specific Safety Rules for Your Lathe

Lathe Turning Safety

Rules for safe workpiece handling, tool selection, and cutting techniques.

Personal Safety During Operation

Protective measures for operators, including PPE and awareness of hazards.

Lathe Setup and Operation Safety

Preparing the Lathe and Workpiece

Instructions for transporting, securing the workpiece, and pre-operation checks.

During Cutting Operations

Safety guidelines to follow while the lathe is in operation.

Electrical Information and Grounding

Grounding Instructions

Proper grounding procedures to prevent electric shock.

Extension Cord Guidelines

Assembly and Adjustments

Installing the Face Plate

Adjusting the Tailstock

Installing the Headstock Spur Center

Installing the Tailstock Live Center

Indexing and Spindle Lock

Adjusting Lathe Speed

Operation - Mounting Workpiece

Mounting Workpiece Between Spindles

Step-by-step guide for securely mounting workpieces for spindle turning.

Operation - Roughing Out Cut

Spindle Turning: Roughing Out Cut

Operation - Finishing and Face Plate Mounting

Spindle Turning: Sanding and Finishing

Mounting Workpiece Onto Face Plate

Operation - Bowl Shaping

Shaping Inside of Bowl or Plate

Troubleshooting Guide

Troubleshooting Error Codes

Solutions for common error codes like low voltage, high voltage, and direction changes.

Troubleshooting Common Problems

Motor and Spindle Issues

Solutions for motor not starting, stalling, and excessive vibration.

Tool and Workpiece Handling Issues

Troubleshooting for tools grabbing, digging in, or workpiece movement.

Maintenance

Routine Inspection and Cleaning