Wen 3424T


12" x 18" 5-SPEED
WOOD LATHE
Model # 3424, 3424T
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
(M-F 8AM-5PM CST)
bit.ly/wenvideo
For replacement parts visit
WENPRODUCTS.COM
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
4005911

Wen 3424T Specifications

General

Brand	Wen
Model	3424T
Category	Lathe
Language	English

Summary

Safety Introduction

General Safety Rules

Work Area Safety

Ensures a safe operating environment by maintaining a clean and well-lit workspace.

Power Tool Use and Care

Guidelines for operating the tool correctly, preventing misuse, and performing basic maintenance.

Electrical Safety

Covers proper grounding, cord care, and precautions against electric shock.

Personal Safety

Emphasizes alertness, common sense, and the use of personal protective equipment.

Specific Rules for Wood Lathes

Electrical Information

Grounding Instructions

Explains the importance of grounding for safety and proper plug connection.

Extension Cord Guidelines

Provides recommendations for selecting the correct gauge and condition of extension cords.

Assembly

Mounting Lathe to Benchtop

Adjustments

Tool Rest Adjustments

Adjusting the height, position, and angle of the tool rest for optimal cutting.

Speed Adjustments

Instructions for changing spindle speed by repositioning the drive belt.

Tailstock Adjustments

Operation

Turning Tools

Operation - Spindle Turning

Mounting Workpiece Between Spindles

Steps for securely mounting stock between the headstock and tailstock centers.

Operation - Spindle Turning (Cont.)

Roughing Out

Creating V-Grooves

Creating Beads

Parting Off

Creating Coves

Operation - Bowl Turning

Mounting Workpiece Onto Face Plate

Securing larger workpieces for bowl turning using a face plate.

Shaping the Inside of the Bowl

Shaping the Outside of the Bowl

Troubleshooting

Motor Will Not Start

Diagnosing and resolving issues when the motor fails to operate.

Motor or Spindle Stalls

Troubleshooting causes for the motor or spindle stopping during use.

Excessive Vibration

Tools Tend to Grab or Dig In

Tailstock Moves When Locked