1. This lathe is designed and intended for use by properly trained and experienced personnel only. If you are not
familiar with the proper and safe operation of a lathe, do not use it until proper training and knowledge have been
acquired.
2. Always wear eye protection and a face shield/dust mask when using the lathe.
3. Do not wear loose clothing or jewelry when using the lathe. Keep your hair, clothing and gloves away from mov-
ing parts. Loose clothes, jewelry or long hair can be caught in the spinning tool.
4. Select the right tool for your task at hand. Make sure all tools, chisels and accessories are sharp before using
them. Do not use dull or damaged tools.
5. Select the appropriate speed for the task. Use slower speeds when starting on a workpiece. Allow the lathe to
ramp up to the operating speed before engaging any chisels, tools or other carving accessories.
6. Check the workpiece carefully for splits, knots, nails, or other obstructions. These types of blemishes may cause
a safety hazards during turning.
7. If gluing up a workpiece for turning, always use a high quality glue that meets the needs of the particular work-
piece to prevent the workpiece from falling off during operation.
8. Cut the workpiece to a rough outline of the finished shape before mounting it on the lathe.
9. Rotate the workpiece by hand to check clearance with the tool rest before turning the machine on.
10. When turning between centers, make sure the headstock and tailstock are tight and snug against the work-
piece.
11. Never apply coolants or water to a spinning workpiece.
12. Never stop a rotating workpiece with your hand.
13. Do not change speeds until the machine comes to a complete stop.
14. Turn off and unplug the machine before doing any cleaning or maintenance. Use a brush or compressed air
to remove chips or debris. Never use your hands to remove excess material and debris.
SPECIFIC RULES FOR WOOD LATHES
These safety instructions can’t possibly warn of every scenario that may arise with this tool,
so always make sure to stay alert and use common sense during operation.
6
To Next Page
Loading...
Need help?
General
