ToolsPre-Assembled
9
UNPACKING
With the help of a friend or trustworthy foe, carefully remove the Lathe from the packaging. Make sure to take
out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list
below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact our
customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com.
PACKING LIST
TRANSPORTING
When transporting the lathe, carry it by the base or handles. Never carry the device by its guards or its accessories.
Parts & Accessories
UNPACKING & TRANSPORTATION
WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.
Lathe (1)
Wrench (1)
Knockout Rod (1)
Hex Wrench
(3mm, 4mm,
5mm, & 12mm)
Live Center for Tailstock (MT2)
Spur Center for Headstock (MT2)
CAUTION! Your lathe is shipped with the spindle lock engaged. The spindle lock must be disengaged before
use. Failure to do so can damage the machine. Refer to "Indexing/Spindle Lock" on p. 13 for more details.
Rubber Feet (4)
Tool Rest Base Assembly (1)
Handle / Tool Holder (2)
Tool Rest (1)
To Next Page
Loading...
