Wen 61720 Operating Instructions

Other manuals for Wen 61720

User Manual13 pages

• J

  Jaime WilliamsAug 12, 2025

  Why is my Wen Nail Gun running slowly or losing power?

  

  Same questionReply

  • C

    Chad AnthonyAug 12, 2025

    Your Wen Nail Gun might be running slowly or losing power due to several reasons. It could be caused by insufficient oil, so you should lubricate it as instructed. Another cause may be insufficient air supply, in which case you should check the air supply. Also, a broken spring in the cylinder cap or a blocked exhaust port in the cylinder cap can lead to this problem, so you should replace the spring or damaged internal parts.

    

    Reply
• M

  Mr. Anthony McdowellAug 15, 2025

  What to do if my Wen Nail Gun fasteners are driven too deep?

  

  Same questionReply

  • A

    April TuckerAug 15, 2025

    If fasteners are being driven too deep by your Wen Nail Gun, it could be due to a worn bumper, which means you should replace it. Alternatively, the air pressure might be too high, so try adjusting the air pressure.

    

    Reply
• S

  Steve ElliottAug 19, 2025

  Why does my Wen Nail Gun keep jamming fasteners?

  

  Same questionReply

  • A

    Alexa StantonAug 19, 2025

    Repeatedly jammed fasteners in your Wen Nail Gun could be due to several reasons. The joint guide might be worn, requiring replacement. Ensure you are using the recommended and undamaged fasteners, as using the wrong size or damaged fasteners can cause jams. Also, check if the magazine or front plate screws are loose and tighten them. Finally, a damaged blade in the piston assembly can cause this issue, so consider replacing the piston assembly.

    

    Reply

Wen 61720 Specifications

General

Brand	Wen
Model	61720
Category	Nail Gun
Language	English

Related product manuals

Wen 61793

18 pages

Wen 61764

18 pages

Wen 61741K

16 pages

Wen 61798 Series

12 pages

Wen 20512BT

20 pages