Wen 61798 Series

12 pages

To Next Page

To Next Page

Loading...

Model # 61798

Clipped Head 34

0

Framing Nailer

bit.ly/wenvideo

Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,

ease of operation, and operator safety. When properly cared for, this product will supply you years

of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,

and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of

safe, reliable service.

IMPORTANT:

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us at:

800-232-1195

techsupport@wenproducts.com

WENPRODUCTS.COM

(M-F 8AM-5PM CST)

Table of Contents

Questions and Answers:

J
Jacqueline LevineJul 28, 2025
What to do if my Wen 61798 Nail Gun fails to start?
- M
  Melissa AndersonJul 28, 2025
  If your Wen Nail Gun is failing to start, first ensure it's properly lubricated with pneumatic tool oil. If lubrication isn't the issue, examine the spring in the cylinder cap for damage and replace if necessary. Also, check if the valve sticks with the cylinder cap, and if so, disassemble, inspect, and lubricate it. Finally, verify that there is a compressed air supply connected to the tool.
B
Bradley BoydAug 6, 2025
How to fix a Wen 61798 that drives fasteners too deeply?
- S
  suzannebellAug 6, 2025
  If your Wen Nail Gun is driving fasteners too deeply, adjust the safety bracket position by moving it down. Also, check the air pressure and decrease it if it is too high.
J
John BowenAug 16, 2025
Why is air leaking from the trigger area of my Wen 61798 Nail Gun?
- A
  asmithAug 17, 2025
  If you notice air leaking at the trigger area of your Wen Nail Gun, it's likely due to a worn or damaged O-ring. Check and replace the O-ring in the trigger valve stem or the O-ring in the trigger valve head, and remember to lubricate after replacement. Another possible cause is foreign matter obstructing the trigger's movement. In this case, clean and lubricate the tool.

Wen 61798 Series Specifications

General

Brand	Wen
Model	61798 Series
Category	Nail Gun
Language	English

Summary

Safety Rules

Know Your Nailer

Operation

Lubrication

Details the required lubrication process before each use for optimal tool performance and warranty.

Recommended Hookup

Illustrates the proper connection of air lines and accessories for safe and efficient tool operation.

Operating Air Pressure

Specifies the recommended air pressure range (70-120 psi) for best tool performance.

Loading the Fasteners

Provides step-by-step instructions for safely loading nails into the magazine.

Adjusting the Directional Exhaust Deflector

Explains how to direct the exhaust air blast away from the operator.

Using the Nailer

Details the sequential trigger mode operation: contact trip first, then pull trigger.

Adjusting the Driving Depth

Describes how to adjust the nail depth by moving the safety bracket.

Clearing a Jammed Nail

Provides instructions to safely clear a jammed nail from the nosepiece.

Troubleshooting

Exploded View

Parts List

Limited One Year Warranty

Related product manuals

Preview: Wen 61793

Preview: Wen 61764

Preview: Wen 61720

Preview: Wen 61741K

Preview: Wen 20512BT