WARNING: If nails continue to jam, stop using the nailer. Contact our customer service at 800-232-1195
(M-F 8-5 CST).
12
CLEARING JAMMED NAILS (Fig. 9)
WARNING: Disconnect air line from the tool and remove all fasteners before removing jammed nails
to avoid personal injury. Keep the tool pointed away from yourself and others.
1. Disconnect the nailer from the air supply and remove all remain-
ing fasteners from the magazine.
2. Flip open the jam-clearing latch and pull up the front plate. Re-
move the jammed nail using pliers or other tools if necessary.
3. Flip down the face plate and secure it with the jam-clearing latch.
Make sure the trigger and safety bracket move freely without stick-
ing or binding.
4. Connect the nailer to the air supply. Load the magazine and test
fire a nail into a scrap piece of wood to confirm the nailer is working
properly again.
OPERATION
Fig. 9
To Next Page
Loading...
