Wenglor P1PY107 - User Manual

Operating Instructions
EN
Translation of the original operating instructions
Subject to change without notice
Available as PDF file only
Version 1.1.1
Status: 06/07/2021
www.wenglor.com
P1PY1xx
Long-Range Laser Distance Sensors
der wintec.

Summary

2. For Your Safety

2.1 Use for Intended Purpose

2.2 Use for Other than the Intended Purpose

Warns against misuse, identifies limitations, and lists industry restrictions.

2.3 Personnel Qualifications

2.4 Modification of Products

States that product modification is impermissible and voids warranty.

2.5 General Safety Precautions

2.6 Laser;LED Warnings

3. Technical Data

3.1 General Data

Presents optical, electrical, and mechanical specifications of the sensor.

3.3 Working Range

Explains factors affecting working range and provides values based on remission/light.

3.4 Mode-Dependent Data

Lists technical data variations based on different operating modes (Speed, Precision).

3.7 Layout

Displays dimensional drawings and pin assignments for different sensor models.

3.8 Control Panel

Illustrates the control panel layout and indicator functions for various models.

5.1 Installation

5.2 Electrical Connection

5.3 Diagnosis

5.3.1 LED Indicators

Explains the meaning of different LED indicators on the sensor.

5.3.2 Troubleshooting

Provides a table of common errors, their causes, and elimination steps.

6. Sensor Settings

6.1 Versions with Switching Outputs

Describes teach-in modes for sensor versions with digital switching outputs.

6.2 Versions with Analog Output

Explains the analog output function and characteristic curves for voltage/current output.

7. IO-Link

7.1 Settings via IO-Link;Parameters

7.1.2 Input;Output Functions (I;O)

Defines the function of pins I/O1, I/O2, and I3 for digital and analog versions.

7.1.3 Switching Point Functions (SSC1;SSC2)

Describes how to set switching points SSC1 and SSC2 for outputs.

7.1.4 Condition Monitoring Functions

7.2 Condition Monitoring;Process Data

7.1.2 Input;Output Functions (I;O)

7.1.2.1 Pin Function

7.1.2.2 Output Functions

7.1.4 Condition Monitoring Functions

7.1.4.1 Status Message Function

7.1.4.2 Warning;Error Output Function

7.1.4.3 Acceleration Sensor (P1 PY111, P1 PY113)

7.1.4.4 Signal Observation

7.2 Condition Monitoring;Process Data

7.2.1 Process Data In

7.2.2 Process Data Out

8. wTeach2 Configuration Software

8.1 General

Information on installing and using the wTeach2 configuration software.

Wenglor P1PY107 Specifications

General

Brand	Wenglor
Model	P1PY107
Category	Security Sensors
Language	English