8
EN
ORIGINAL INSTRUCTIONS
Users can view the electronic
instructions at www.wesco.com.
PRODUCT SAFETY
GENERAL SAFETY WARNINGS
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
This machine can be used by people with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the
machine in a safe way and understand the hazards involved.
Machines shall not be used by children. Children should be
supervised to ensure that they do not play with the machine.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
ADDITIONAL SAFETY WARNINGS
WARNING: Read the instructions before using the
machine.
- Safety boots, safety gloves, safety helmets with visors, hearing
protection etc. shall be worn while operating the machine.
- When opening the trigger gun, there is a danger of the kickback
force and the sudden torque on the spray assembly. Please hold
the nozzles tightly.
- WARNING: This machine has been designed for use with the
cleaning agent supplied or recommended by the manufacturer.
The use of other cleaning agents or chemicals may adversely
affect the safety of the machine.
- WARNING: High pressure jets can be dangerous if subject to
misuse. The jet must not be directed at persons, live electrical
equipment or the machine itself.
- WARNING: Do not use the machine within range of persons
unless they wear protective clothing.
- WARNING: Do not direct the jet against yourself or others in
order to clean clothes or foot-wear.
- Disconnect from the electrical power supply before carrying out
user maintenance.
- WARNING: High pressure cleaner should not be used by children
or untrained personnel.
- WARNING: Risk of explosion – Do not spray flammable liquids.
- WARNING: To ensure machine safety, use only original spare
parts from the manufacturer or approved by the manufacturer.
- WARNING: High pressure hoses, fittings and couplings are
important for the safety of the appliance. Use only hoses, fittings
and couplings recommended by the manufacturer
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Spray gun
1
Pressure hose (8m)
1
Nozzle pin
1
PVC cable (6m)
1
Lance with turbo nozzle
1
Lance with normal nozzle
1
Water inlet screw
1
We recommend that you purchase your accessories listed in the above list from the same store that sold you the tool. Refer to the accessory
packaging for further details. Store personnel can assist you and offer advice.
To Next Page
Loading...
