To Next PageTo Next PageWhat to do if the Weslo CARDIO STRIDE 4.0 Treadmill console does not function properly?
First, move the Reed Switch so that there is a 1/8" (3 mm) gap between the Reed Switch and the Magnet. Second, check if the handrail wire is plugged fully into the console. Third, apply anti-static spray to the handrail.
Provides contact information for customer support and service inquiries.
General warnings about reading the manual before using the equipment.
Guide on how to manually change the treadmill's incline level.
Steps to resolve common issues with the treadmill console not functioning correctly.
Solutions for the walking belt moving improperly or being off-center.
Advice on how often to exercise for maintaining or improving fitness levels.
General