Need help?Do you have a question about the Westcott FJ80-SE Series and is the answer not in the manual?
General| Brand | Westcott |
|---|---|
| Model | FJ80-SE Series |
| Category | Camera Accessories |
| Language | English |
Firmware updates improve performance and GUI. Review documentation before installing.
FEC on triggers is independent of client FEC. Client FEC changes are not visually indicated.
Two overlapping squares visible in Canon Continuous Mode. 20 FPS at power level 4 and below.
Displays camera, TTL, group, mode, power, zoom, sync, and standby status.
Displays group, channel, mode, and zoom settings for client devices.
Displays camera, mode, power, sync, and zoom settings for the speedlight.
Use caution due to heat, avoid touching lens, use correct battery and mounting.
Self-monitoring system with [OH] display and increased recycle time to prevent overheating.
Information on updating firmware for performance enhancements and new features.
Step-by-step guide to charge the battery using the provided charger and AC adapter.
Explanation of LED indicators: Blinking Green (ready), Solid Green (charged), Solid Yellow (50%), Solid Red (charging).
Verify battery charge and secure insertion before turning the speedlight on.
Instructions for attaching the speedlight to a camera's hot shoe using the locking dial.
Steps to securely remove the speedlight from the camera's hot shoe.
Guide to powering on, performing a test fire, and powering off the speedlight.
Instructions for attaching and removing the speedlight from a cold shoe stand.
Guide to affixing and detaching magnetic modifiers to the speedlight head.
Press M button to toggle modes; enable by displaying camera brand, mode, zoom, battery.
Details menu options for Speedlight mode: Menu 1 and Menu 2.
Instructions for enabling and using the AF Assist Beam feature.
Enabling HOST mode, Group SLP mode, and digital screen button selections.
Enabling CLIENT mode, Group SLP mode, and digital screen button selections.
Information on using full-stop increments in manual mode with the FJ Wireless Trigger.
Ideal for normal scenarios and color consistency; shows arrows indicating sync type.
For mixing ambient light and flash at shutter speeds above normal sync speed (up to 1/8000s).
Ideal for freezing fast-moving objects; available in Manual Mode only.
Refer to FJ Wireless Trigger manual for remote zoom control of single and all groups.
Instructions to access and navigate the settings menu using the control dial.
List of configurable settings including Camera, RT ID#, Screen, Auto-Off, X-Sync, Beep, Freeze, Display, AF Beam, Reset, Return.
The battery provides 550+ full-power flashes with modeling lamp disabled and minimum brightness.
Average charge time ~3 hours; ~200 full-charge cycles. Store at ~40% capacity.
To Next Page
