Need help?Do you have a question about the Westermo DDW-142 and is the answer not in the manual?
Information regarding the document's content, warranties, and Westermo's liability.
Availability of related software tools on the Westermo website.
Details on FLOSS licenses and source code availability.
Reference to the guide for WeOS operating system instructions.
Prerequisites and warnings before installing the unit.
Guidelines for maintaining the unit and fulfilling warranty obligations.
Statement that no maintenance is required for the unit.
Instructions for proper disposal of the product according to environmental regulations.
Statement on compliance with EU directives and availability of full declaration.
List of agency approvals and standards compliance.
Notice regarding Class B digital device compliance and potential interference.
Product tested for corrosive environments and protection advice.
ESD and Fast Transient immunity test levels.
Surge and Pulse Magnetic Field immunity test levels.
RF immunity test levels for radiated and conducted phenomena.
Tests for voltage dips, interruptions, and RF emissions.
Dielectric strength test levels for port isolation.
Temperature, humidity, altitude, and corrosive gas specifications.
Service life, MTBF, shock, bump, and vibration specifications.
Enclosure material, dimensions, weight, degree of protection, cooling, and mounting.
Overview of Wolverine DDW-142/DDW-242 Ethernet extender capabilities.
Rated and operating voltage, rated current, startup current.
Frequency, inrush current, polarity, redundant input, isolation.
Connection type, connector size, and shielded cable requirements.
RS-232 electrical, data, transmission, and connection specifications.
Ethernet TX electrical, data, transmission, and connection specifications.
Console port electrical, data, and connection specifications.
Electrical spec, data rate, circuit type, supply current, connection.
Voltage/current, resistance, isolation, connection, connector size.
Voltage/load current, levels, isolation, connection, connector size.
ITU-T G.991.2, data rate, protocol, transmission range, connection.
Pinout and signal descriptions for the RS-232 port.
Pinout and signal descriptions for the Ethernet TX ports.
Pinout and signal descriptions for the USB port.
Status for DC, FRNT, RSTP, and USR1 LEDs.
Status and quality indicators for SHDSL ports.
Status for RD, TD, and Copper port LEDs.
Procedure for attaching the product using its integrated DIN-clip.
Procedure for detaching the product using a screwdriver.
IPConfig tool, Web browser, and CLI for configuration.
Default IP, Netmask, Gateway, and network configuration notes.
Steps to configure the unit via web browser, including login details.
Reference to the Westermo OS management guide.
Steps to initiate and conduct the factory reset process.
Procedure to bypass factory reset and perform a normal boot.
To Next Page
General